View HCPL2503_130012.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 PACKAGE 6N136 HCPL-2531 HCPL-2503 HCPL-4502
SCHEMATIC
N/C 1
8 VCC
+1 V
F1
8 VCC
8
+2
1
7 VB
_
2
7 V01
VF _ 3 6 VO _ 3 6 V02
VF2 N/C 4 5 GND +4 5 GND
8 1
8 1
6N135, 6N136, HCPL-2503, HCPL-4502 Pin 7 is not connected in Part Number HCPL-4502 HCPL-2530/HCPL-2531
DESCRIPTION
The HCPL-4502/HCPL-2503, 6N135/6 and HCPL-2530/HCPL-2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. An internal noise shield provides superior common mode rejection of 10kV/s. An improved package allows superior insulation permitting a 480 V working voltage compared to industry standard of 220 V.
FEATURES
* * * * * * High speed-1 MBit/s Superior CMR-10 kV/s Dual-Channel HCPL-2530/HCPL-2531 Double working voltage-480V RMS CTR guaranteed 0-70C U.L. recognized (File # E90700)
APPLICATIONS
* * * * Line receivers Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling
(c) 2004 Fairchild Semiconductor Corporation
Page 1 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 6N136 HCPL-2531 HCPL-2503 HCPL-4502
ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise specified)
Parameter Storage Temperature Operating Temperature Lead Solder Temperature EMITTER DC/Average Forward Input Current Peak Forward Input Current (50% duty cycle, 1 ms P.W.) Each Channel (Note 2) Peak Transient Input Current - (1 s P.W., 300 pps) Each Channel Reverse Input Voltage Input Power Dissipation DETECTOR Average Output Current Peak Output Current Emitter-Base Reverse Voltage Supply Voltage Output Voltage Base Current Output power dissipation (6N135, 6N136 and HCPL-2503 only) (6N135, 6N136, HCPL-2503, HCPL-4502) (Note 4) (HCPL-2530, HCPL-2531) Each Channel Each Channel Each Channel (6N135, 6N136 and HCPL-2503 only) IO (avg) IO (pk) VEBR VCC VO IB PD 8 16 5 -0.5 to 30 -0.5 to 20 5 100 35 mA mA V V V mA mW mW Each Channel (6N135/6N136 and HCPL-2503/4502) (HCPL-2530/2531 ) Each Channel (Note 3) Each Channel (Note 1) IF (avg) IF (pk) IF (trans) VR PD 25 50 1.0 5 100 45 mA mA A V mW Symbol TSTG TOPR TSOL Value -55 to +125 -55 to +100 260 for 10 sec Units C C C
(c) 2004 Fairchild Semiconductor Corporation
Page 2 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 6N136 HCPL-2531 HCPL-2503 HCPL-4502
ELECTRICAL CHARACTERISTICS (TA = 0 to 70C Unless otherwise specified) INDIVIDUAL COMPONENT CHARACTERISTICS
Parameter EMITTER Input Forward Voltage Input Reverse Breakdown Voltage Temperature coefficient of forward voltage DETECTOR (IF = 0 mA, VO = VCC = 5.5 V) (TA =25C) Logic high output current (IF = 0 mA, VO = VCC = 15 V) (TA =25C) (IF = 0 mA, VO = VCC = 15 V) (IF = 16 mA, VO = Open) (VCC = 15 V) (IF1 = IF2 = 16 mA, VO = Open) (VCC = 15 V) (IF = 0 mA, VO = Open, VCC = 15 V) (TA =25C) Logic high supply current ICCH IOH All 6N135 6N136 HCPL-4502 HCPL-2503 All 6N135 6N136 HCPL-4502 HCPL-2503 HCPL-2530 HCPL-2531 6N135 6N136 HCPL-4502 HCPL-2503 6N135 6N136 HCPL-4502 HCPL-2503 HCPL-2530 HCPL-2531 0.02 0.001 0.5 Test Conditions (IF = 16 mA, TA =25C) (IF = 16 mA) (IR = 10 A) (IF = 16 mA) Symbol VF BVR (VF/TA) 5.0 -1.6 Device Min Typ** Max 1.45 1.7 1.8 Unit V V mV/C
0.005
1
A
50
120
200 A
Logic low supply current
ICCL
200
400
1
(IF = 0 mA, VO = Open) (VCC = 15 V) (IF = 0 mA, VO = Open) (VCC = 15 V)
A 2
4
** All Typicals at TA = 25C
(c) 2004 Fairchild Semiconductor Corporation
Page 3 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 6N136 HCPL-2531 HCPL-2503 HCPL-4502
TRANSFER CHARACTERISTICS (TA = 0 to 70C Unless otherwise specified)
Parameter COUPLED (IF = 16 mA, VO = 0.4 V) (VCC = 4.5 V, TA =25C) Test Conditions Symbol Device 6N135 HCPL-2530 6N136 HCPL-4502 HCPL-2531 HCPL-2503 Current transfer ratio (Note 5) (IF = 16 mA, VCC = 4.5 V) VOL=0.4V VOL=0.5V VOL=0.4V VOL=0.5V VOL=0.4V (IF = 16 mA, IO = 1.1 mA) (VCC = 4.5 V, TA =25C) (IF = 16 mA, IO = 3 mA) (VCC = 4.5 V, TA =25C) (IF = 16 mA, IO = 0.8 mA) (VCC = 4.5 V) (IF = 16 mA, IO = 2.4 mA) (VCC = 4.5 V) ** All Typicals at TA = 25C CTR 6N135 HCPL-2530 6N136 HCPL-4502 HCPL-2531 HCPL-2503 6N135 HCPL-2530 6N136 HCPL-2503 VOL HCPL-2531 6N135 HCPL-2530 HCPL-4502 HCPL-2531 9 30 0.18 0.18 0.25 0.25 0.4 0.5 0.4 0.5 0.5 0.5 V % Min 7 Typ** 18 Max 50 Unit %
19 12 5
27 27 21
50
% % %
15
30
%
Logic low output voltage output voltage
(c) 2004 Fairchild Semiconductor Corporation
Page 4 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 6N136 HCPL-2531 HCPL-2503 HCPL-4502
SWITCHING CHARACTERISTICS (TA = 0 to 70C unless otherwise specified., VCC = 5 V)
Parameter Test Conditions TA = 25C, (RL = 4.1 k, IF = 16 mA) (Note 6) (Fig. 7) (RL = 1.9 k, IF = 16 mA) (Note 7) (Fig. 7) TA = 25C Propagation delay time to logic low (RL = 4.1 k, IF = 16 mA) (Note 6) (Fig. 7) TPHL Symbol Device 6N135 HCPL-2530 6N136 HCPL-4502 HCPL-2503 HCPL-2531 6N135 HCPL-2530 6N136 HCPL-4502 HCPL-2503 HCPL-2531 6N135 HCPL-2530 6N136 HCPL-4502 HCPL-2503 HCPL-2531 6N135 HCPL-2530 6N136 HCPL-4502 HCPL-2503 HCPL-2531 6N135 HCPL-2530 |CMH| 6N136 HCPL-4502 HCPL-2503 HCPL-2531 6N135 HCPL-2530 |CML| 6N136 HCPL-4502 HCPL-2503 HCPL-2531 10,000 0.5 Min Typ** 0.45 Max Unit 1.5 s
0.45
0.8
s
2.0
s
(RL = 1.9 k, IF = 16 mA) (Note 7) (Fig. 7)
1.0
s
TA = 25C, (RL = 4.1 k, IF = 16 mA) (Note 6) (Fig. 7) (RL = 1.9 k, IF = 16 mA) (Note 7) (Fig. 7) TA = 25C Propagation delay time to logic high TPLH (RL = 4.1 k, IF = 16 mA) (Note 6) (Fig. 7)
1.5
s
0.3
0.8
s
2.0
s
(RL = 1.9 k, IF = 16 mA) (Note 7) (Fig. 7) (IF = 0 mA, VCM = 10 VP-P, RL = 4.1 k) (Note 8) (Fig. 8) TA = 25C (IF = 0 mA, VCM = 10 VP-P) TA = 25C, (RL = 1.9 k) (Note 8) (Fig. 8) (IF = 16 mA, VCM = 10 VP-P, RL = 4.1 k) (Note 8) (Fig. 8) TA = 25C (IF = 16 mA, VCM = 10 VP-P) (RL = 1.9 k) (Note 8) (Fig. 8)
1.0
s
Common mode transient immunity at logic high
V/s
10,000
V/s
Common mode transient immunity at logic low ** All Typicals at TA = 25C
10,000
V/s
10,000
V/s
(c) 2004 Fairchild Semiconductor Corporation
Page 5 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 6N136 HCPL-2531 HCPL-2503 HCPL-4502
ISOLATION CHARACTERISTICS (TA = 0 to 70C Unless otherwise specified)
Characteristics Input-output insulation leakage current Test Conditions (Relative humidity = 45%) (TA = 25C, t = 5 s) (VI-O = 3000 VDC) (Note 9) (RH 50%, TA = 25C) (Note 9) ( t = 1 min.) (Note 9) (VI-O = 500 VDC) (Note 9) (f = 1 MHz) (IO = 3 mA, VO = 5 V) (RH 45%, VI-I = 500 VDC) (Note 10) t = 5 s, (HCPL-2530/2531 only) (VI-I = 500 VDC) (Note 10) (HCPL-2530/2531 only) (f = 1 MHz) (Note 10) (HCPL-2530/2531 only) Symbol Min Typ** Max Unit
II-O
1.0
A
Withstand insulation test voltage Resistance (input to output) Capacitance (input to output) DC Current gain Input-Input Insulation leakage current Input-Input Resistance Input-Input Capacitance
VISO RI-O CI-O HFE II-I RI-I CI-I
2500 1012 0.6 150 0.005 1011 0.03
VRMS pF
A pF
Notes 1. Derate linearly above 70C free-air temperature at a rate of 0.8 mA/C. 2. Derate linearly above 70C free-air temperature at a rate of 1.6 mA/C. 3. Derate linearly above 70C free-air temperature at a rate of 0.9 mW/C. 4. Derate linearly above 70C free-air temperature at a rate of 2.0 mW/C. 5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. 6. The 4.1 k load represents 1 LSTTL unit load of 0.36 mA and 6.1k pull-up resistor. 7. The 1.9 k load represents 1 TTL unit load of 1.6 mA and 5.6 k pull-up resistor. 8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO>2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO<0.8 V). 9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
I
(c) 2004 Fairchild Semiconductor Corporation
Page 6 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 6N136 HCPL-2531 HCPL-2503 HCPL-4502
Fig. 1 Normalized CTR vs. Forward Current
1.2 1.2
Fig. 2 Normalized CTR vs. Temperature
1.0
1.0
NORMALIZED CTR
0.8
NORMALIZED CTR
0.8
0.6
0.6
0.4 Normalized to: IF = 16 mA 0.2 VO = 0.4 V VCC = 5 V TA = 25C
0.4 Normalized to: TA = 25C 0.2 IF = 16mA VCC = 5 V VO = 0.4 V
0.0 0.1
1
10
100
0.0 -60
-40
-20
0
20
40
60
80
100
IF - FORWARD CURRENT (mA)
TA - TEMPERATURE (C)
Fig. 3 Output Current vs. Output Voltage
16 14 TA = 25C VCC = 5 V IF = 40 mA IF = 35 mA 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 IF = 30 mA IF = 25 mA IF = 20 mA IF = 15 mA IF = 10 mA IF = 5 mA 1000
Fig. 4 Logic High Output Current vs. Temperature
IOH - LOGIC HIGH OUTPUT CURRENT (nA)
IF = 0 mA VCC = 5 V VO = 5 V 100
IO - OUTPUT CURRENT (mA)
10
1
0.1 -60
-40
-20
0
20
40
60
80
100
VO - OUTPUT VOLTAGE (V)
TA - TEMPERATURE (C)
Fig. 5 Propagation Delay vs. Temperature
800 700 10000
Fig. 6 Propagation Delay vs. Load Resistance
Tp - PROPAGATION DELAY (ns)
600 500 400 300 200
RL = 4.1 K (TPLH)
TP - PROPAGATION DELAY (ns)
RL = 4.1 K (TPLH)
IF - 16 mA (TPHL) IF - 10 mA (TPHL) 1000
IF - 16 mA (TPLH)
RL = 1.9 K (TPHL) 100 0 -60
RL = 1.9 K (TPLH)
IF = 16 mA VCC = 5 V
IF - 10 mA (TPLH) -40 -20 0 20 40 60 80 100 100 1
VCC = 5 V TA = 25C
10
TA - TEMPERATURE (C)
RL = LOAD RESISTANCE (k)
(c) 2004 Fairchild Semiconductor Corporation
Page 7 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 6N136 HCPL-2531 HCPL-2503 HCPL-4502
Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100s
1
+
Noise Shield
8 7 6 5
VCC
+5 V
Pulse Generator tr = 5ns Z O = 50
IF
+
Noise Shield
1
VF1 -
8 7 6 5
VCC RL
+5 V
2
VF -
VB
RL
10% DUTY CYCLE I/f < 100S VO
2 3 4
V01
VO C L = 1.5 F
3
I F Monitor Rm
VO 0.1 F
IF MONITOR VF2 + Rm
V02 0.1 F
4
GND
GND
C L = 1.5 F
Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502
Test Circuit for HCPL-2530 and HCPL-2531
IF 0
VO
5V
1.5 V
1.5 V VOL
TPHL
TPLH
Fig. 7 Switching Time Test Circuit
IF
1
+
Noise Shield
8 7 6 5
VCC
+5 V IF
+ VF1 A
Noise Shield
1 2 3 4
8 7 6 5
VCC RL V01
+5 V
2
A B VFF VF -
VB
RL
VO 0.1 F
3 4
+
VCM
VO
VO 0.1 F
B VFF
VF2 +
V02
GND
-
GND
-
Pulse Gen
+
VCM -
Pulse Gen Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502 Test Circuit for HCPL-2530 and HCPL-2531
VCM 10 V 10% tr
90%
90% 10% tf
0V
VO Switch at A : IF = 0 mA VO Switch at A : IF = 16 mA
5V
VOL
Fig. 8 Common Mode Immunity Test Circuit
(c) 2004 Fairchild Semiconductor Corporation
Page 8 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 Package Dimensions (Through Hole)
PIN 1 ID.
4 3 2 1
6N136 HCPL-2531
HCPL-2503
HCPL-4502
Package Dimensions (Surface Mount)
0.390 (9.91) 0.370 (9.40)
4 3 2 1
PIN 1 ID.
0.270 (6.86) 0.250 (6.35)
5 6 7 8
0.270 (6.86) 0.250 (6.35)
0.390 (9.91) 0.370 (9.40)
5
6
7
8
SEATING PLANE
0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.140 (3.55) 0.020 (0.51) MIN
0.070 (1.78) 0.045 (1.14) 0.020 (0.51) MIN
0.300 (7.62) TYP 0.016 (0.41) 0.008 (0.20)
0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.016 (0.40) 0.008 (0.20) 15 MAX 0.300 (7.62) TYP
0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP Lead Coplanarity : 0.004 (0.10) MAX
0.045 [1.14] 0.315 (8.00) MIN 0.405 (10.30) MIN
Package Dimensions (0.4"Lead Spacing)
Recommended Pad Layout for Surface Mount Leadform
4
3
2
1
PIN 1 ID.
0.070 (1.78)
0.270 (6.86) 0.250 (6.35)
0.060 (1.52)
5 6 7 8
0.390 (9.91) 0.370 (9.40)
0.100 (2.54) 0.295 (7.49)
0.070 (1.78) 0.045 (1.14)
SEATING PLANE
0.415 (10.54)
0.030 (0.76)
0.200 (5.08) 0.140 (3.55)
0.004 (0.10) MIN
0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.016 (0.40) 0.008 (0.20) 0 to 15 0.400 (10.16) TYP
NOTE All dimensions are in inches (millimeters)
(c) 2004 Fairchild Semiconductor Corporation
Page 9 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 ORDERING INFORMATION
Option S SD T V TV SV SDV Example Part Number 6N135S 6N135SD 6N135T 6N135V 6N135TV 6N135SV 6N135SDV Description Surface Mount Lead Bend Surface Mount; Tape and reel 0.4" Lead Spacing VDE0884 VDE0884; 0.4" lead spacing VDE0884; surface mount VDE0884; surface mount; tape and reel
6N136 HCPL-2531
HCPL-2503
HCPL-4502
MARKING INFORMATION
1
2503 V
3 4
2 6
XX YY T1
5
Definitions
1 2 3 4 5 6 Fairchild logo Device number VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) Two digit year code, e.g., `03' Two digit work week ranging from `01' to `53' Assembly package code
(c) 2004 Fairchild Semiconductor Corporation
Page 10 of 12
11/2/04
HIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLE-CHANNEL: 6N135 DUAL-CHANNEL: HCPL-2530 6N136 HCPL-2531 HCPL-2503 HCPL-4502
Carrier Tape Specifications
12.0 0.1 4.0 0.1 4.0 0.1 O1.55 0.05 1.75 0.10
4.90 0.20
0.30 0.05
7.5 0.1 13.2 0.2 16.0 0.3 10.30 0.20
0.1 MAX
10.30 0.20
O1.6 0.1
User Direction of Feed
Reflow Profile
300 Temperature (C) 250 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 225 C peak
215 C, 10-30 s
Time above 183C, 60-150 sec Ramp up = 3C/sec 3.5 4 4.5
Time (Minute) * Peak reflow temperature: 225C (package surface temperature) * Time of temperature higher than 183C for 60-150 seconds * One time soldering reflow is recommended
(c) 2004 Fairchild Semiconductor Corporation
Page 11 of 12
11/2/04
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM FAST ActiveArrayTM FASTrTM BottomlessTM FPSTM CoolFETTM FRFETTM CROSSVOLTTM GlobalOptoisolatorTM DOMETM GTOTM EcoSPARKTM HiSeCTM E2CMOSTM I2CTM EnSignaTM i-LoTM FACTTM ImpliedDisconnectTM FACT Quiet SeriesTM
ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC Across the board. Around the world.TM OPTOPLANARTM PACMANTM The Power Franchise POPTM Programmable Active DroopTM
Power247TM PowerEdgeTM PowerSaverTM PowerTrench QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM SILENT SWITCHER SMART STARTTM SPMTM
StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic TINYOPTOTM TruTranslationTM UHCTM UltraFET VCXTM
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I13

▲Up To Search▲

Price & Availability of HCPL2503

	To Download HCPL2503 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .